Dell PowerVault DR4100 Manuale delle migliori pratiche - Pagina 38

Sfoglia online o scarica il pdf Manuale delle migliori pratiche per Immagazzinamento Dell PowerVault DR4100. Dell PowerVault DR4100 41. Backup and recovery appliance
Anche per Dell PowerVault DR4100: Manuale introduttivo (10 pagine), Manuale (37 pagine), Nota di rilascio (16 pagine), Manuale (12 pagine), Manuale (24 pagine), Manuale (23 pagine), Impostazione di Qiuck (1 pagine), Manuale (27 pagine), Manuale (25 pagine)

Stampa la pagina
Dell PowerVault DR4100 Manuale delle migliori pratiche
1.
Upgrade the DR appliance to the latest 2.1 firmware.
2.
After the upgrade, two additional 1 GB interfaces will appear. The 10GB interfaces will be bonded as bond0.
Use the following command to view the available network interfaces:
network --show
3.
Break bond0 and release eth0 from bond0 using the following command:
network -- delete --member <eth(0-N)>
network – restart
administrator@DR> network --delete -- member eth0
network --restart
4.
Use the following command to view the released interface eth0:
network --show
5.
Assign an IP address and DNS name to the released interfaces using the following command:
network   -­‐ -­‐create_interface   -­‐ -­‐nwif<   e htN>   -­‐ -­‐static   -­‐ -­‐ip<ip   a ddress>   -­‐ -­‐netmask<netmask>   -­‐ -­‐
name<dns   n ame>   -­‐ -­‐restart  
 
 
administrator@DR> network --create_interface --nwif eth0 --static_ip x.x.x.x --netmask
 
255.255.255.0 --name dr-cifs.local --resta
 
 
 
Note: Bond0 will maintain the default name given to it at time of setup.
6.
Use the following command to verify network settings:
network --show
Note: Take note of the DNS names for bond0 and for the configured 1GB interface. These DNS names are required to
force traffic to the specified interface.
7.
Create two CIFS containers on the DR appliance. One container called cifs-container-1 and the other cifs-
container-2.
38
DR4100 Best Practice Guide | April 2014
Example
Example