Dell PowerVault MD3200i Series Benutzerhandbuch - Seite 20

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lagerung Dell PowerVault MD3200i Series herunter. Dell PowerVault MD3200i Series 46 Seiten. Storage arrays
Auch für Dell PowerVault MD3200i Series: Handbuch für den Einsatz (41 seiten), Handbuch aktualisieren (32 seiten), Anweisungen zur Rack-Installation (2 seiten), Support-Matrix (12 seiten), Installationshandbuch (18 seiten), Information Update (1 seiten), Support-Matrix (11 seiten), Support-Matrix (17 seiten), Technisches Handbuch (38 seiten), Weißbuch (22 seiten), Handbuch (16 seiten)

Figure 12. Port Binding Separate vSwitches

After you map VMkernel ports to network adapters, use the esxcli command

to connect the ports with the software iSCSI initiator.

Activate Multipathing for Software iSCSI Initiator

Use this task only if your ESX/ESXi host has two or more physical network

adapters that you designate for iSCSI traffic. This task explains how to

activate host-based multipathing for your host by connecting the software

iSCSI initiator to iSCSI VMkernel ports that you created for the network

adapters.

Before you activate multipathing, complete the following tasks:

•

Create VMkernel ports for the physical network adapters making sure to

use 1:1 port to adapter mapping.

•

Enable the software iSCSI initiator.

To activate multipathing for software iSCSI initiator:

1 Identify the names of VMkernel iSCSI ports assigned to physical adapters.

The vSphere Client displays the port's name below the network label.

Example 1: Figure 13 shows the ports' names as vmk1 and vmk2.

Dell MD Storage Array vCenter Plug-in