Dell PowerVault MD3200i Series Kullanıcı Kılavuzu - Sayfa 20

Depolama Dell PowerVault MD3200i Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell PowerVault MD3200i Series 46 sayfaları. Storage arrays
Ayrıca Dell PowerVault MD3200i Series için: Dağıtım Kılavuzu (41 sayfalar), Güncelleme Kılavuzu (32 sayfalar), Raf Kurulum Talimatları (2 sayfalar), Destek Matrisi (12 sayfalar), Kurulum Kılavuzu (18 sayfalar), Bilgi Güncellemesi (1 sayfalar), Destek Matrisi (11 sayfalar), Destek Matrisi (17 sayfalar), Teknik El Kitabı (38 sayfalar), Beyaz Kitap (22 sayfalar), Manuel (16 sayfalar)

Sayfayı Yazdır
Dell PowerVault MD3200i Series Kullanıcı Kılavuzu
Figure 12. Port Binding Separate vSwitches
After you map VMkernel ports to network adapters, use the esxcli command
to connect the ports with the software iSCSI initiator.

Activate Multipathing for Software iSCSI Initiator

Use this task only if your ESX/ESXi host has two or more physical network
adapters that you designate for iSCSI traffic. This task explains how to
activate host-based multipathing for your host by connecting the software
iSCSI initiator to iSCSI VMkernel ports that you created for the network
adapters.
Before you activate multipathing, complete the following tasks:
•
Create VMkernel ports for the physical network adapters making sure to
use 1:1 port to adapter mapping.
•
Enable the software iSCSI initiator.
To activate multipathing for software iSCSI initiator:
1 Identify the names of VMkernel iSCSI ports assigned to physical adapters.
The vSphere Client displays the port's name below the network label.
Example 1: Figure 13 shows the ports' names as vmk1 and vmk2.
20
Dell MD Storage Array vCenter Plug-in