Dell PowerVault MD3200i Series Kullanıcı Kılavuzu - Sayfa 19

Depolama Dell PowerVault MD3200i Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell PowerVault MD3200i Series 46 sayfaları. Storage arrays
Ayrıca Dell PowerVault MD3200i Series için: Dağıtım Kılavuzu (41 sayfalar), Güncelleme Kılavuzu (32 sayfalar), Raf Kurulum Talimatları (2 sayfalar), Destek Matrisi (12 sayfalar), Kurulum Kılavuzu (18 sayfalar), Bilgi Güncellemesi (1 sayfalar), Destek Matrisi (11 sayfalar), Destek Matrisi (17 sayfalar), Teknik El Kitabı (38 sayfalar), Beyaz Kitap (22 sayfalar), Manuel (16 sayfalar)

Networking Configuration for Software iSCSI

Storage

Networking configuration for software iSCSI involves creating an iSCSI

VMkernel port and mapping it to a physical NIC that handles iSCSI traffic.

Depending on the number of physical NICs you use for iSCSI traffic, the

networking setup can be different:

•

If you have one physical NIC, create one VMkernel port on a vSwitch and

map the port to the NIC. VMware recommends that you designate a

separate network adapter entirely for iSCSI. No additional network

configuration steps are required.

•

If you have two or more physical NICs for iSCSI, you can create multiple

paths for the software iSCSI by using the port binding technique.

With port binding, you create a separate VMkernel port for each physical NIC

using 1:1 mapping. You can add all network adapter and VMkernel port pairs

to a single vSwitch, as shown in Figure 11.

Figure 11. Port Binding Single vSwitch

Another alternative is to create a separate vSwitch for each network adapter

and VMkernel port pair, as shown in Figure 12.

Dell MD Storage Array vCenter Plug-in