Dell PowerVault TL2000 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lagerung Dell PowerVault TL2000 herunter. Dell PowerVault TL2000 20 Seiten. Tape library
Auch für Dell PowerVault TL2000: Anmerkungen zur Veröffentlichung (3 seiten), Erste Schritte (38 seiten), Faq (26 seiten), Schnellstart-Handbuch (7 seiten), Software-Handbuch (16 seiten), Konfigurationshandbuch (22 seiten), Wichtige Informationen Handbuch (10 seiten), Benutzerhandbuch Addendum (2 seiten), Handbuch "Erste Schritte (3 seiten), Anbringung von Anweisungen (17 seiten), Broschüre (4 seiten)

Seite drucken

Read This First

Minimum Firmware Levels for Common Library Features

Contacting Dell

Table 1. Minimum Firmware Levels for common Library features

Feature

LTO HH V2 Tape Drives

LTO 5 Tape Drive

Library BCR (Bar Code Reader)

Dedicated Cleaning Slot removal

Encryption

Key Path Diagnostics

Path Failover

IPv6 Support

For customers in the United States, call 800-WWW-DELL (800-999-3355).

Note: If you do not have an active Internet connection, you can find contact

information on your purchase invoice, packing slip, bill, or Dell product

catalog.

Dell provides several online and telephone-based support and service options.

Service availability varies by country and product, and some services may not be

available in your area. To contact Dell for sales, technical support, or customer

service issues follow the steps listed below:

1. Visit http://support.dell.com.

2. Verify your country or region in the Choose A Country/Region drop-down

menu at the bottom of the page.

Minimum Firmware Level(s) Required

Library firmware level must be at 10.00, or

greater, to support HH V2 Tape Drives.

Library firmware must be at 9.00, or greater,

to support the Ultrium 5 drives. Ensure the

minimum version required to support

Ultrium 5 tape drives are installed on the

host. Ensure any host applications and

software, that use their own device drivers,

are at the minimum level required to

support Ultrium 5 tape drives.

Libraries manufactured after May 2010 may

have a BCR that requires a minimum level

of library firmware. The minimum level of

firmware for these libraries is 9.00. Attempts

to downlevel these libraries below 9.00 will

be blocked by the library.

Library firmware level must be greater than

3.90.

Library firmware level must be 5.80 or

greater.

LTO4 Drive firmware level must be 77BE or

greater.

Library firmware level must be greater than

6.3, if feature is available.

LTO 4 Tape Drives: No minimum level of

firmware is required.

Library firmware level: 4.50

iii