Dell PowerVault TL2000 Kullanıcı Kılavuzu - Sayfa 5

Depolama Dell PowerVault TL2000 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell PowerVault TL2000 20 sayfaları. Tape library
Ayrıca Dell PowerVault TL2000 için: Sürüm Notları (3 sayfalar), Başlarken (38 sayfalar), SSS (26 sayfalar), Hızlı Başlangıç Kılavuzu (7 sayfalar), Yazılım Kılavuzu (16 sayfalar), Yapılandırma Kılavuzu (22 sayfalar), Önemli Bilgiler Kılavuzu (10 sayfalar), Kullanıcı Kılavuzu Eki (2 sayfalar), Başlangıç Kılavuzu (3 sayfalar), Ek Talimatları (17 sayfalar), Broşür (4 sayfalar)

Sayfayı Yazdır
Dell PowerVault TL2000 Kullanıcı Kılavuzu
Read This First
Minimum Firmware Levels for Common Library Features
Contacting Dell
Table 1. Minimum Firmware Levels for common Library features
Feature
LTO HH V2 Tape Drives
LTO 5 Tape Drive
Library BCR (Bar Code Reader)
Dedicated Cleaning Slot removal
Encryption
Key Path Diagnostics
Path Failover
IPv6 Support
For customers in the United States, call 800-WWW-DELL (800-999-3355).
Note: If you do not have an active Internet connection, you can find contact
information on your purchase invoice, packing slip, bill, or Dell product
catalog.
Dell provides several online and telephone-based support and service options.
Service availability varies by country and product, and some services may not be
available in your area. To contact Dell for sales, technical support, or customer
service issues follow the steps listed below:
1. Visit http://support.dell.com.
2. Verify your country or region in the Choose A Country/Region drop-down
menu at the bottom of the page.
Minimum Firmware Level(s) Required
Library firmware level must be at 10.00, or
greater, to support HH V2 Tape Drives.
Library firmware must be at 9.00, or greater,
to support the Ultrium 5 drives. Ensure the
minimum version required to support
Ultrium 5 tape drives are installed on the
host. Ensure any host applications and
software, that use their own device drivers,
are at the minimum level required to
support Ultrium 5 tape drives.
Libraries manufactured after May 2010 may
have a BCR that requires a minimum level
of library firmware. The minimum level of
firmware for these libraries is 9.00. Attempts
to downlevel these libraries below 9.00 will
be blocked by the library.
Library firmware level must be greater than
3.90.
Library firmware level must be 5.80 or
greater.
LTO4 Drive firmware level must be 77BE or
greater.
Library firmware level must be greater than
6.3, if feature is available.
LTO 4 Tape Drives: No minimum level of
firmware is required.
Library firmware level: 4.50
iii