Dell Cisco Catalyst 3850 PS Series Konfigurationshandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Schalter Dell Cisco Catalyst 3850 PS Series herunter. Dell Cisco Catalyst 3850 PS Series 10 Seiten. Sans
Seite drucken
2.5
Configure policy-map and increase queue multiplier
Switch(config)#policy-map single-queue-buffer
Switch(config-pmap)#class class-default
Switch(config-pmap-c)#bandwidth percent 100
Switch(config-pmap-c)#queue-buffers ratio 100
Switch(config-pmap-c)#exit
Switch(config-pmap)#exit
Note: Cisco issue CSCuu14019 and other related issues require the following buffer multiplier command to
prevent output queue drops.
Switch(config)#qos queue-softmax-multiplier 1200
2.6
Configure port-channel interfaces
Switch(config)#interface port-channel 1
Switch(config-if)#switchport
Switch(config-if)#flowcontrol receive on
Switch(config-if)#exit
Note: 10 Gb ports 1/1/3 and 1/1/4 are used for the port-channel. Change the port number in the following
command if using other ports for the port channel between two switches.
Switch(config)#interface range tenGigabitEthernet 1/1/3 - 4
Switch(config-if-range)#no shutdown
Switch(config-if-range)#channel-group 1 mode active
Switch(config-if-range)#service-policy output single-queue-buffer
Switch(config-if-range)#exit
8
Cisco Catalyst 3850 Switch Configuration Guide for Dell PS Series SANs | SCG3299