Dell Cisco Catalyst 3850 PS Series Konfigurationshandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Schalter Dell Cisco Catalyst 3850 PS Series herunter. Dell Cisco Catalyst 3850 PS Series 10 Seiten. Sans
Seite drucken
2.7
Configuring edge-ports
Perform this step for each individual port that is connected to a storage controller or a host interface port, or
specify a range of ports to configure. This section enables link-level flow control (802.3x), portfast, and service
policy.
Switch(config)#interface range gigabitEthernet 1/0/1 – 24
Note: Configure all the 48 ports for the 48 port model of the switch using the following command.
# interface range gigabitEthernet 1/0/1 – 48
Switch(config-if-range)#flowcontrol receive on
Switch(config-if-range)#spanning-tree portfast
Switch(config-if-range)#service-policy output single-queue-buffer
Switch(config-if-range)#switchport
Switch(config-if-range)#no shutdown
Switch(config-if-range)#exit
Switch(config)#exit
2.8
Save configuration
Switch#copy running-config startup-config
2.9
Configure additional switch
Repeat the commands from sections 2.1 through 2.8 to configure the second switch.
9
Cisco Catalyst 3850 Switch Configuration Guide for Dell PS Series SANs | SCG3299