Dell Cisco Catalyst 3850 PS Series Yapılandırma Kılavuzu - Sayfa 9
Anahtar Dell Cisco Catalyst 3850 PS Series için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Dell Cisco Catalyst 3850 PS Series 10 sayfaları. Sans
Sayfayı Yazdır
2.7
Configuring edge-ports
Perform this step for each individual port that is connected to a storage controller or a host interface port, or
specify a range of ports to configure. This section enables link-level flow control (802.3x), portfast, and service
policy.
Switch(config)#interface range gigabitEthernet 1/0/1 – 24
Note: Configure all the 48 ports for the 48 port model of the switch using the following command.
# interface range gigabitEthernet 1/0/1 – 48
Switch(config-if-range)#flowcontrol receive on
Switch(config-if-range)#spanning-tree portfast
Switch(config-if-range)#service-policy output single-queue-buffer
Switch(config-if-range)#switchport
Switch(config-if-range)#no shutdown
Switch(config-if-range)#exit
Switch(config)#exit
2.8
Save configuration
Switch#copy running-config startup-config
2.9
Configure additional switch
Repeat the commands from sections 2.1 through 2.8 to configure the second switch.
9
Cisco Catalyst 3850 Switch Configuration Guide for Dell PS Series SANs | SCG3299