Dell EMC S5000 Installationshandbuch - Seite 33

Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter Dell EMC S5000 herunter. Dell EMC S5000 42 Seiten.

Connecting Three S5000 Systems

To provide backup connectivity and increased data transfer between the systems, Dell EMC recommends inserting an additional cable

between the two units, in a second stacking port.

CAUTION:

The S5000 does not require special stacking cables. The cables used to connect 10GbE and 40GbE data ports

are sufficient.

NOTE:

The port numbers in the following procedure are used as examples only.

1. Insert one end of the first cable into stack port 60 of chassis 1 (bottom).

2. Insert the other end of the cable into stack port 56 of chassis 2 (center).

3. Insert the second cable into stack port 60 of chassis 2 (center) and port 56 of chassis 3 (top).

4. Use the third cable to connect the top and bottom units by inserting one end of the cable into stack port 56 on chassis 1 (bottom) and

the other end of the cable into stack port 60 on chassis 3 (top).

Installation