Dell Force10 S4820T System Handbuch "Erste Schritte - Seite 32

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Schalter Dell Force10 S4820T System herunter. Dell Force10 S4820T System 39 Seiten.

Dell Force10 S4820T System Handbuch
To set up the RS-232/RJ-45 console port, follow these steps:
Step
Task
Install an RJ-45 copper cable into the console port. Use a rollover cable to
1
connect the S4820T console port to a terminal server.
Connect the other end of the cable to the DTE terminal server.
2
Set the default terminal settings as follows:
3
• 9600 baud rate
• No parity
• 8 data bits
• 1 stop bit
• No flow control
Accessing the RJ-45 Console Port with a DB-9 Adapter
If the DTE has a DB-9 interface, you can connect to the console using an RJ-45
to DB-9 adapter along with the RJ-45 rollover cable. Table 2-1 lists the pin
assignments.
Table 2-1. Pin Assignments Between the Console and a DTE Terminal Server
Console Port
RJ-45 to RJ-45 Rollover Cable
Signal
RJ-45 Pinout
RTS
1
NC
2
TxD
3
GND
4
GND
5
RxD
6
NC
7
CTS
8
26
Performing the Initial Configuration
RJ-45 to DB-9
Adapter
RJ-45 Pinout
DB-9 Pin
8
8
7
6
6
2
5
5
4
5
3
3
2
4
1
7
Terminal Server
Device
Signal
CTS
DSR
RxD
GND
GND
TxD
DTR
RTS