Dell PowerConnect 8024F Konfigurationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Schalter Dell PowerConnect 8024F herunter. Dell PowerConnect 8024F 21 Seiten. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Auch für Dell PowerConnect 8024F: Anmerkungen zur Veröffentlichung (27 seiten), Anmerkungen zur Veröffentlichung (20 seiten), Handbuch zur Umsetzung (8 seiten), Aktualisieren der Firmware (24 seiten)

2.11

Configure port channel for LAG

These commands configure the switch interconnect as a LAG.

console(conf)#interface Port-channel 1

console(conf-if-Po1)#mtu 9216

console(conf-if-Po1)#exit

2.12

These commands assign four 10Gb SFP+ ports to the Port Channel.

console(conf)#interface range Tengigabitethernet 1/0/21-24

console(conf-if)#channel-group 1 mode active

console(conf-if)#exit

console(conf)#exit

2.13

console#copy running-config startup-config

This operation may take a few minutes.

Management interfaces will not be available during this time.

Are you sure you want to save? (y/n)y

2.14

Repeat the commands from section 2 to configure the second switch.

Note: The preceding procedure places all switch ports in the default VLAN. If you prefer to place ports in a

non-default VLAN, refer to the documentation for your switch.

SCG1008

PowerConnect 8024, 8024F, M8024 and M8024-k Switch Configuration Guide for EqualLogic SANs