Dell S4148-ON Konfigurationshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Schalter Dell S4148-ON herunter. Dell S4148-ON 19 Seiten. Dell emc sc series sans

Configure Data Center Bridging (DCB) (optional)

3.11

Apply policies and VLAN ID to all switch edge ports

OS10(config)# interface range ethernet 1/1/1-1/1/54

OS10(conf-range-eth1/1/1-1/1/54)# switchport mode trunk

OS10(conf-range-eth1/1/1-1/1/54)# switchport trunk allowed vlan <vlan-id>

OS10(conf-range-eth1/1/1-1/1/54)# service-policy input type network-qos <policy-

map-name>

OS10(conf-range-eth1/1/1-1/1/54)# service-policy output type queuing <queuing-

policy-name>

OS10(conf-range-eth1/1/1-1/1/54)# ets mode on

OS10(conf-range-eth1/1/1-1/1/54)# qos-map traffic-class <queue-map-name>

OS10(conf-range-eth1/1/1-1/1/54)# priority-flow-control mode on

OS10(conf-range-eth1/1/1-1/1/54)# exit

OS10(config)#

3.12

OS10(config)# iscsi enable

OS10(config)# iscsi session-monitoring enable

OS10(config)# exit

3.13

OS10# copy running-configuration startup-configuration

3.14

Show commands to verify DCBx, ETS, and PFC status on individual

ports

OS10# show lldp dcbx interface ethernet 1/1/<port-number>

OS10# show lldp dcbx interface ethernet 1/1/<port-number> pfc detail

OS10# show lldp dcbx interface ethernet 1/1/<port-number> ets detail

3.15

Repeat the commands from section 3 to configure DCB on additional switches.

15 Dell EMC Networking S4148-ON and S4128-ON Switch Configuration Guide for Dell EMC SC Series SANs | SCG3704