360 Vision Affiniti Thermal IP Handbuch zur Installation und Konfiguration - Seite 15
Blättern Sie online oder laden Sie pdf Handbuch zur Installation und Konfiguration für Sicherheitskamera 360 Vision Affiniti Thermal IP herunter. 360 Vision Affiniti Thermal IP 20 Seiten.
Seite drucken
Affiniti Thermal IP Install Manual V2.1.17.3
5.7 Date/Time
•
Camera - Cannot be edited, shows label/name given to the camera.
(See section Video - Camera - page 10).
Time in Camera - Cannot be edited, shows the current date and time of the camera.
•
The Date/Time page, offers options to:-
•
Set Manually - Input time/date manually.
Synchronize with Computer Time - Put a tick in the button and then click OK, to apply the local
•
computer date/time to the camera.
•
Synchronize with SNTP Server - Put a tick in the button and then click OK, to apply the local server
date/time to the camera.
•
SNTP Server - Input the address of the time server required, default is pool.ntp.org.
•
Time Zone - Select time zone to suit the location of the camera/system.
Date Format - Select from the drop down the date format.
•
•
Time Format - Choose 24hr or 12hr time display.
•
Date Position - Choose date text to bottom right or left of the image.
Time Position - Choose time text to bottom right or left of the image.
•
(See section Video - Stream Tabs - page 10).
NTP Calibration
This is used to calibrate the codec clock to a SNTP server so that the codec time is more accurate.
•
Start - Click on this option to start the process. Synchronize with SNTP Server option must be
selected with access to the SNTP server. The process takes approx 20 minutes.
Refresh - Use this option to manually refresh the web page to show how much of the process has
•
been done, or if it is complete.
OK to apply the new settings into the Affiniti Thermal IP.
Cancel to abandon the changes to the date/time settings.
© 360 Vision Technology Ltd.
Page 15