360 Vision Affiniti Thermal IP Installation & Configuration Manual - Page 15
Browse online or download pdf Installation & Configuration Manual for Security Camera 360 Vision Affiniti Thermal IP. 360 Vision Affiniti Thermal IP 20 pages.
Print Page
Affiniti Thermal IP Install Manual V2.1.17.3
5.7 Date/Time
•
Camera - Cannot be edited, shows label/name given to the camera.
(See section Video - Camera - page 10).
Time in Camera - Cannot be edited, shows the current date and time of the camera.
•
The Date/Time page, offers options to:-
•
Set Manually - Input time/date manually.
Synchronize with Computer Time - Put a tick in the button and then click OK, to apply the local
•
computer date/time to the camera.
•
Synchronize with SNTP Server - Put a tick in the button and then click OK, to apply the local server
date/time to the camera.
•
SNTP Server - Input the address of the time server required, default is pool.ntp.org.
•
Time Zone - Select time zone to suit the location of the camera/system.
Date Format - Select from the drop down the date format.
•
•
Time Format - Choose 24hr or 12hr time display.
•
Date Position - Choose date text to bottom right or left of the image.
Time Position - Choose time text to bottom right or left of the image.
•
(See section Video - Stream Tabs - page 10).
NTP Calibration
This is used to calibrate the codec clock to a SNTP server so that the codec time is more accurate.
•
Start - Click on this option to start the process. Synchronize with SNTP Server option must be
selected with access to the SNTP server. The process takes approx 20 minutes.
Refresh - Use this option to manually refresh the web page to show how much of the process has
•
been done, or if it is complete.
OK to apply the new settings into the Affiniti Thermal IP.
Cancel to abandon the changes to the date/time settings.
© 360 Vision Technology Ltd.
Page 15