360 Vision Affiniti Thermal IP Installation & Configuration Manual - Page 13
Browse online or download pdf Installation & Configuration Manual for Security Camera 360 Vision Affiniti Thermal IP. 360 Vision Affiniti Thermal IP 20 pages.
Print Page
Affiniti Thermal IP Install Manual V2.1.17.3
Force Onvif Version
Can be used to change the Onvif version reported by the camera to the VMS, options are:-
•
Default - Onvif 2.40
•
V2.02
•
V2.20
•
V2.40
Ok setting and then re-boot camera from web page to apply.
Presets
•
Default - Used on certain VMS servers. Uses mix of text and 'P' zero-pad number as preset tokens.
•
Number only - Used on certain VMS servers. Uses numbers as preset tokens.
•
'P' zero-pad number - Used on certain VMS servers. Uses P001 to P360 as preset tokens.
•
Auth
Used on Vicon VMS, allows the anonymous user to set as admin, viewer or operator.
Pan/Tilt Position
Used on VMS systems that apply different Onvif parameters.
Camera Reset
•
Power reset - This will reboot the camera, no settings will be lost.
•
Factory reset - This will reboot the camera and all the settings, except IP address will be lost.
Select option from the drop down box, and then click on perform reset.
5.6 Camera
•
Camera - Cannot be edited, shows label/name given to the camera.
(See section Video - Camera - page 10).
The Camera page, offers options to:-
•
Digital Zoom - Feature not available.
•
White Balance - Feature not available.
•
Wide Dynamic range - Feature not available.
OK to program the new settings into the Affiniti Thermal IP.
Cancel to abandon the changes to the advanced feature settings.
© 360 Vision Technology Ltd.
Page 13