Christie Terra SCO 100 EO Handbuch für Einrichtung und Installation - Seite 14

Blättern Sie online oder laden Sie pdf Handbuch für Einrichtung und Installation für Controller Christie Terra SCO 100 EO herunter. Christie Terra SCO 100 EO 17 Seiten. Controlled systems

Seite drucken

Connecting a computer

To interact with the Terra system, you must connect a computer to the same LAN and the same subnet

address as the controller.

Computer Requirements

A computer used to access the Terra system requires the following:

• One Ethernet port

• 64-bit Windows operating system

• .Net Framework 4.5.1 or higher

• 1GB free storage space

• 2GB RAM

Connecting the Controller to the Network

When connecting a Controller, best practices include:

Selecting the Controller using the Terra Startup Assistant software to configure IP information for

•

Terra devices.

•

Include the Gateway address for the Controller.

•

Apply static IP addresses.

Best practice is to apply static IP addresses to Terra devices. Static addresses are superior for

managing permanently installed AV devices and for verifying system configuration, device status,

and troubleshooting. DHCP address management is popular for desktop PCs because they frequently

migrate and this eliminates configuration time for IT staff. Terra Controllers, TXs, and RXs are

network appliances that are similar to printers and servers that do not migrate and are better

managed using static IP addresses.

Use of static IP addresses also reduces the amount of DHCP/DNS network traffic resulting in greater

efficiency. A compromise that can be used when network policies dictate use of DHCP addressing is

to reserve a block of static IP addresses for use with Terra TXs and RXs and other AV devices.

1. Connect a standard CAT6 Ethernet cable to the Ethernet CONTROL port (C6) on the Controller and

other end to the switch.

2. Power on the Controller.

3. Review the front panel display, and verify an IP address is displayed.

4. Refer to the Terra User Guide (020-001355-nn) to configure display and source configuration and

programming.

Terra Controller Installation and Setup Manual

020-102804-02 Rev. 1 (09-2018)

Install and Setup