HP 234664-002 - ProLiant - ML330T02 Handbuch zur Umsetzung - Seite 20

Blättern Sie online oder laden Sie pdf Handbuch zur Umsetzung für Desktop HP 234664-002 - ProLiant - ML330T02 herunter. HP 234664-002 - ProLiant - ML330T02 35 Seiten. Visualization and acceleration in hp proliant servers
Auch für HP 234664-002 - ProLiant - ML330T02: Häufig gestellte Fragen (4 seiten), Technisches Weißbuch (12 seiten), Firmware-Aktualisierung (9 seiten), Übersicht (20 seiten), Handbuch zur Umsetzung (26 seiten), Einführung Handbuch (22 seiten), Handbuch zur Fehlersuche (18 seiten), Handbuch zur Umsetzung (11 seiten), Installationshandbuch (2 seiten), Konfigurationshandbuch (2 seiten), Einführung Handbuch (19 seiten), Handbuch aktualisieren (9 seiten), Handbuch aktualisieren (16 seiten), Einführung Handbuch (10 seiten), Installationsanleitung Handbuch (15 seiten), Technologie-Brief (9 seiten)

• Array Configuration Utility (www.hp.com/cgi-bin/hpsupport/index.pl)

• System Configuration Utility (www.hp.com/cgi-bin/hpsupport/index.pl)

These utilities are not required for servers with RBSU/ORCA.

SmartStart configuration

If performing a fresh installation to an empty hard drive, HP recommends that using SmartStart to

configure the server. SmartStart provides assisted, manual, and replicated installation approaches to

setting up the pre-OS installation and installing the necessary software after the OS installation.

SmartStart is provided in the HP ProLiant Essentials Foundation Pack included with every HP ProLiant

server. Updates are available on the SmartStart website at

The SmartStart Scripting Toolkit, also included in the HP ProLiant Essentials Foundation Pack, offers

scripting tools for high volume server deployment and enables unattended automated installation. To

learn more about this product and review its best practices guide, check the website at

www.hp.com/servers/sstoolkit

Included with every HP ProLiant BL10e server, and recommended for large numbers of HP ProLiant

ML/DL servers, is the HP ProLiant Essentials Rapid Deployment Pack. Integrating the Altiris eXpress

Deployment Server and the SmartStart Scripting Toolkit, the Rapid Deployment Pack provides a

simplified point-and-click solution for deploying and maintaining standard server software

configurations.

For additional information on this advanced deployment tool, visit

Complete the following steps to install Microsoft Windows 2000 on the server.

Prepare the pre-boot environment prior to booting the Windows 2000 OS. This involves the

following steps:

Update the System and Option ROMs as necessary for the hardware.

Set up the system and boot partition if necessary.

Configure the storage arrays

Using SmartStart to facilitate all of these steps is highly recommended as is following the steps

provided in the SmartStart documentation. In addition to providing a step-by-step approach to

complete system software installation, SmartStart also intelligently guides the system setup based

on the availability of ROM-based server setup and storage array configuration tools.

IMPORTANT

Existing NTFS partitions automatically upgrade to NTFS 5

partitions. Windows NT 3.51 systems on the same server

cannot access NTFS 5 partitions; Windows NT 4.0 on the

same server cannot read NTFS 5 partitions unless Microsoft

Service Pack 4 or later has been installed.

Boot from the Microsoft Windows 2000 CD to install the operating system. The product key code

and licensing information are also required. When prompted, create a new partition with at least

1 GB of free space. Detailed instructions for installing Windows 2000 can be found in the Help

files on the Windows 2000 CD.

Help files for Windows 2000 Server Edition can also be found at

http://technet.microsoft.com/en-us/windowsserver/2000/default.aspx. For Windows 2000