Miele Triflex HX1R Betriebsanleitung - Seite 39

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Staubsauger Miele Triflex HX1R herunter. Miele Triflex HX1R 48 Seiten. Cordless vacuum cleaner

Seite drucken

Problem

The operating noise is

changing during vacu-

uming.

The Electrobrush

switches itself off.

The roller brush is not

rotating.

Cleaning performance

is reduced.

The cleaning perform-

ance is poor.

The vacuum cleaner

keeps falling over.

Cause and remedy

The Electrobrush power consumption is automatic-

ally set to the optimum level based on the type of

flooring.

 The noise is not unusual – the vacuum cleaner is

functioning normally.

The Electrobrush is overloaded – this can happen on

surfaces like deep-pile carpet.

 Switch the vacuum cleaner off and switch it on

again at a reduced suction power level. Use the

On/Off switch on the Comfort handle to do this.

The roller brush is dirty.

 Clean the roller brush (see "Maintenance – Clean-

ing the Electrobrush" and "Removing the roller

brush from the Electrobrush").

The fine dust filter/pre-filter is soiled.

 Run the interim cleaning function for the fine dust

filter (see "Maintenance – Activating the Comfort-

Clean function").

 Clean both filters thoroughly (see "Maintenance –

Cleaning the pre-filter and fine dust filter").

The fine dust filter is worn.

 Insert a new fine dust filter (HX FSF-2).

The dust container is full.

 Empty and clean the dust container (see "Mainten-

ance").

The Electrobrush is dirty/blocked.

 Clean the Electrobrush (see "Maintenance –

Cleaning the Electrobrush" and "Removing the

roller brush from the Electrobrush").

You have configured the vacuum cleaner with the

PowerUnit at the top.

 Reassemble the vacuum cleaner so that it is con-

figured with the PowerUnit at the bottom (see "In-

stallation and connection – Assembling the va-

cuum cleaner").

Problem solving guide