Miele Triflex HX1R Gebruiksaanwijzing - Pagina 39

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele Triflex HX1R. Miele Triflex HX1R 48 pagina's. Cordless vacuum cleaner

Pagina afdrukken

Problem

The operating noise is

changing during vacu-

uming.

The Electrobrush

switches itself off.

The roller brush is not

rotating.

Cleaning performance

is reduced.

The cleaning perform-

ance is poor.

The vacuum cleaner

keeps falling over.

Cause and remedy

The Electrobrush power consumption is automatic-

ally set to the optimum level based on the type of

flooring.

 The noise is not unusual – the vacuum cleaner is

functioning normally.

The Electrobrush is overloaded – this can happen on

surfaces like deep-pile carpet.

 Switch the vacuum cleaner off and switch it on

again at a reduced suction power level. Use the

On/Off switch on the Comfort handle to do this.

The roller brush is dirty.

 Clean the roller brush (see "Maintenance – Clean-

ing the Electrobrush" and "Removing the roller

brush from the Electrobrush").

The fine dust filter/pre-filter is soiled.

 Run the interim cleaning function for the fine dust

filter (see "Maintenance – Activating the Comfort-

Clean function").

 Clean both filters thoroughly (see "Maintenance –

Cleaning the pre-filter and fine dust filter").

The fine dust filter is worn.

 Insert a new fine dust filter (HX FSF-2).

The dust container is full.

 Empty and clean the dust container (see "Mainten-

ance").

The Electrobrush is dirty/blocked.

 Clean the Electrobrush (see "Maintenance –

Cleaning the Electrobrush" and "Removing the

roller brush from the Electrobrush").

You have configured the vacuum cleaner with the

PowerUnit at the top.

 Reassemble the vacuum cleaner so that it is con-

figured with the PowerUnit at the bottom (see "In-

stallation and connection – Assembling the va-

cuum cleaner").

Problem solving guide