DIAL CASS-PNL-09-12 Installationshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationshandbuch für Klimagerät DIAL CASS-PNL-09-12 herunter. DIAL CASS-PNL-09-12 4 Seiten. For cassette panel

Seite drucken

2.4 Wiring

Step 1

The panel is designed with the coupling shown in the figure below.

Tear off the adhesive tape fixing the coupling, lead it out and

connect it to the body coupling as shown in the figure below.

Motor wiring for automatic air

deflector (body side) (5-pin red

coupling used for light-current

applications)

Step 2

Install the air intake grille upon completion of wiring. Mount the

strap hook of part ① in panel hole during installation as described

in Section 2.2. The air intake grille can be installed in any of the 4

directions by rotating it. Where several indoor units are installed

simultaneously, the air intake grille installation can be freely

selected.

Be sure to turn off power before electrical wiring work

not, it may cause malfunction of

Protect the wires or etc. from rats or other animals.

If not protected, rats may gnaw at unprotected parts and at the

worst, a fire will occur.

Motor wiring for

automatic air

deflector (panel

side) (5-pin red

coupling used for

light-current

applications)

auto

swing louver

3.Test Run

After indoor and outdoor runs, check the swing louvers.

Please press "swing'' button when operate louvers by using remote

controller, details see remote controller manual.

VERSION NO. 2020270,A