Burkert 0290 Betriebsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Kontrolleinheit Burkert 0290 herunter. Burkert 0290 15 Seiten. 2/2-way solenoid valve
Auch für Burkert 0290: Betriebsanleitung (15 seiten)

Seite drucken

2.2 Approvals

Devices which bear the type approval mark were approved at the Kraft-

fahrtbundesamt under the type approval number

e1*72/245*2006/96*5791*00

and are put into circulation with the indi-

cated type approval mark.

You can obtain an excerpt from the type approval from the address below

Bürkert Werke GmbH

Zulassungsbeauftragter

Christian-Bürkert-Str. 13-17

D-74653 Ingelfingen

BASIC SAFETY INSTRUCTIONS

These safety instructions do not make allowance for any contingencies

and events which may arise during installation, operation and maintenance.

Danger – high pressure.

▶ Before loosening the lines and valves, turn off the pressure and

vent the lines.

Risk of electric shock.

▶ Before reaching into the 0290, switch off the power supply and

secure to prevent reactivation.

▶ Observe applicable accident prevention and safety regulations for

electrical equipment.

Risk of burns/Risk of fire if used continuously through hot device

surface.

▶ Keep the device away from highly flammable substances and media

and do not touch with bare hands.

Risk of injury due to malfunction of valves with alternating

current (AC).

Sticking core causes coil to overheat, resulting in a malfunction.

▶ Monitor process to ensure function is in perfect working order.

Risk of short-circuit/escape of media through leaking screw

joints.

▶ Ensure seals are seated correctly.

▶ Carefully screw valve and connection lines together.

Opening the valve briefly

If the pressure increases suddenly with the valve closed, the valve

may open for a short time.

▶ Take safety precautions as required with hazardous media.

english