Burkert 0290 사용 설명서 - 페이지 3

{카테고리_이름} Burkert 0290에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Burkert 0290 15 페이지. 2/2-way solenoid valve
Burkert 0290에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지)

2.2 Approvals

Devices which bear the type approval mark were approved at the Kraft-

fahrtbundesamt under the type approval number

e1*72/245*2006/96*5791*00

and are put into circulation with the indi-

cated type approval mark.

You can obtain an excerpt from the type approval from the address below

Bürkert Werke GmbH

Zulassungsbeauftragter

Christian-Bürkert-Str. 13-17

D-74653 Ingelfingen

BASIC SAFETY INSTRUCTIONS

These safety instructions do not make allowance for any contingencies

and events which may arise during installation, operation and maintenance.

Danger – high pressure.

▶ Before loosening the lines and valves, turn off the pressure and

vent the lines.

Risk of electric shock.

▶ Before reaching into the 0290, switch off the power supply and

secure to prevent reactivation.

▶ Observe applicable accident prevention and safety regulations for

electrical equipment.

Risk of burns/Risk of fire if used continuously through hot device

surface.

▶ Keep the device away from highly flammable substances and media

and do not touch with bare hands.

Risk of injury due to malfunction of valves with alternating

current (AC).

Sticking core causes coil to overheat, resulting in a malfunction.

▶ Monitor process to ensure function is in perfect working order.

Risk of short-circuit/escape of media through leaking screw

joints.

▶ Ensure seals are seated correctly.

▶ Carefully screw valve and connection lines together.

Opening the valve briefly

If the pressure increases suddenly with the valve closed, the valve

may open for a short time.

▶ Take safety precautions as required with hazardous media.

english