Allo RemoteControl AVIDSEN 104250 BRICO Anweisungen

Blättern Sie online oder laden Sie pdf Anweisungen für Controller Allo RemoteControl AVIDSEN 104250 BRICO herunter. Allo RemoteControl AVIDSEN 104250 BRICO 2 Seiten.

Seite drucken

First type of receiver

1. Open the casing of your receiver. It is located next to your motor.

2. On the receiver circuit board, press the programming button (RF). Keep it pressed down.

The receiver LED light comes on (L1). Release the button

3. Within the next 10 seconds, press a button on your new remote control, release it. The

receiver LED blinks.

4. Wait 10 seconds.

5. Your new remote control is programmed.

Visit our Website: www.alloremotecontrol.com

AVIDSEN 104250 BRICO

INSTRUCTIONS