Burkert 2033 Schnellstart-Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Controller Burkert 2033 herunter. Burkert 2033 19 Seiten. Piston-operated diaphragm valves

Seite drucken

Type 2030, 2031, 2031 K, 2032,

Mark

Inclination to

the line axis

α= 1° – 5°

Fig. 2:

Installation position for self-drainage of the body

7.1.3 Installation position of T-valve Type 2032

The following positions are recommended for installation in the ring

circuits:

For supply of a medium:

Fig. 3:

Installation position of Type 2032

7.1.4 Installation position of Y-valve Type 2037

The following positions are recommended for installation in the

systems:

For supply of a medium:

Fig. 4:

Installation position of Type 2037

2033, 2037

Installation

upwards

For removal of a medium:

7.1.5 Welding tank bottom body type 2033

Recommendation

Observe sequence:

1. Weld the tank bottom body onto the base of the tank

before installing the tank. Welding onto a tank which has

already been installed is possible but more difficult. Weld

the tank bottom body in the middle of the tank base so that

the tank can be optimally drained.

2. Weld tank bottom body into the pipeline.

Installation requirements:

Pipelines:

Ensure that the pipelines are aligned.

Preparation: Support and align pipelines. To ensure that the

pipeline is self-draining, observe an inclination angle

of 1°...5°.

DANGER

Risk of injury from high pressure.

▶ Before working on the system, switch off the pressure and

vent or drain lines.

For information on tanks and instructions on welding

observe the standard ASME VIII Division I.

Before you start welding, check the batch number indicated

on the supplied manufacturer's certificate 3.1.

Observe the applicable laws and regulations of the

respective country with regard to the qualification of

welders and the execution of welding work.

english