Allpro APS2730H Reparaturanleitung und Teileliste - Seite 4

Blättern Sie online oder laden Sie pdf Reparaturanleitung und Teileliste für Hochdruckreiniger Allpro APS2730H herunter. Allpro APS2730H 16 Seiten.

Pressure Relief

Follow these instructions whenever you are instructed to relieve pressure,

stop spraying for more than 10 minutes, check or service the equipment,

or install or clean the spray nozzle.

1. Engage trigger safety latch.

2. Turn Pressure Washer off and remove ignition cable

from spark plug.

3. Shut off water supply. Disconnect from water.

4. Remove trigger safety latch and trigger gun to

relieve pressure. Then engage the safety latch.

Note: If you suspect the spray tip or hose is clogged or that pressure has not been fully relieved after

following this procedure, disengage trigger safety latch and trigger gun again.

309887