Miller Axcess 300 Benutzerhandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schweißen System Miller Axcess 300 herunter. Miller Axcess 300 36 Seiten. Arc welding power source and wire feeder with meters
Auch für Miller Axcess 300: Benutzerhandbuch (44 seiten), Benutzerhandbuch (48 seiten)

Seite drucken
Miller Axcess 300 Benutzerhandbuch

2-3. Volt-Ampere Curve

2-4. Installing Work Clamp

OM-1317 Page 10
5
1
2
3
1
Normal Volt-Ampere Curves
The volt-ampere curves show the
normal minimum and maximum
voltage and amperage output capa-
bilities of the welding power source.
Curves of other settings fall be-
tween the curves shown.
2
Overload Volt-Ampere Curves
When unit is used beyond capacity,
circuitry senses the overload and
shuts down unit output. Release
trigger and lower weld voltage set-
ting before trying to weld. This shut
down circuitry protects internal
circuits and parts from overload
damage.
1
Work Cable
2
Boot
Slide boot onto work cable. Route
cable out front panel opening from
inside.
3
Negative (–) Output Terminal
Connect cable to terminal and
cover connection with boot.
4
4
Hardware
5
Work Clamp
Route cable through clamp handle
and secure as shown.
Close door.
Tools Needed:
1/2, 3/4 in
ST-185 560
ST-801 955