Miller Maxstar 161 STH Benutzerhandbuch - Seite 24

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für das Schweißen Miller Maxstar 161 STH herunter. Miller Maxstar 161 STH 44 Seiten. Arc welding power source with auto-line

Seite drucken
Miller Maxstar 161 STH Benutzerhandbuch

5-6. Shoulder And Handle Strap Installation

A. Shoulder Strap Installation
1
Insert strap through cam buckle
4
Strap End
3
OM-275099 Page 20
.
A complete Parts List is available at www.MillerWelds.com
Detail A
2
Detail A is Critical!
As Shown
1
2
2
Strap Buckle Assembly
1
Strap
2
Cam Buckle
If necessary, before attaching
shoulder/handle strap to power
source, assemble strap/buckle as
shown.
Installing And Securing Shoul-
der Portion Of Strap To Welding
Power Source
1
Shoulder/Handle Strap
Route strap as shown.
2
Bezel (Front And Rear)
3
Pin
4
Cam Buckle Lever
Route and secure shoulder strap as
follows:
• Route looped ends of strap
through openings in bezels.
• Insert pins through strap loops.
• Pull up on straps to pull pins up in-
to bezel openings. Pull straps
3
firmly enough to seat pins in re-
taining slots in openings.
• Press buckle lever, and slide
strap through buckle to obtain de-
sired length. Release lever.
• Proceed To Section 5-6B to in-
stall and secure handle portion of
strap.
257817-A / 805576-A