Miller Maxstar 161 STH Gebruikershandleiding - Pagina 24
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Maxstar 161 STH. Miller Maxstar 161 STH 44 pagina's. Arc welding power source with auto-line
Pagina afdrukken
5-6. Shoulder And Handle Strap Installation
A. Shoulder Strap Installation
1
Insert strap through cam buckle
4
Strap End
3
OM-275099 Page 20
.
A complete Parts List is available at www.MillerWelds.com
Detail A
2
Detail A is Critical!
As Shown
1
2
2
Strap Buckle Assembly
1
Strap
2
Cam Buckle
If necessary, before attaching
shoulder/handle strap to power
source, assemble strap/buckle as
shown.
Installing And Securing Shoul-
der Portion Of Strap To Welding
Power Source
1
Shoulder/Handle Strap
Route strap as shown.
2
Bezel (Front And Rear)
3
Pin
4
Cam Buckle Lever
Route and secure shoulder strap as
follows:
• Route looped ends of strap
through openings in bezels.
• Insert pins through strap loops.
• Pull up on straps to pull pins up in-
to bezel openings. Pull straps
3
firmly enough to seat pins in re-
taining slots in openings.
• Press buckle lever, and slide
strap through buckle to obtain de-
sired length. Release lever.
• Proceed To Section 5-6B to in-
stall and secure handle portion of
strap.
257817-A / 805576-A