Miller Maxstar 161 STL Benutzerhandbuch - Seite 23

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für das Schweißen Miller Maxstar 161 STL herunter. Miller Maxstar 161 STL 44 Seiten. Arc welding power source with auto-line

Seite drucken

5-5. Connecting 1-Phase Input Power For 240 VAC (Continued)

Installation must meet all National

and Local Codes − have only

qualified

persons

installation.

Disconnect and lockout/tagout input

power

before

connecting

conductors from unit.

Always connect green or green/yellow

conductor to supply grounding termi-

nal first, and never to a line terminal.

Do not use power cord to lift or carry

welding power source.

See rating label on unit and check input volt-

age available at site.

The Auto-Line circuitry in this unit auto-

matically links the power source to the

primary voltage being applied, either 120

or 240 VAC.

NOTICE − Do Not modify the power cord. The

power cord plugs will work with standard NE-

MA receptacles. Use only the power cords

supplied with this unit. Modifying the power

cord(s) and/or plugs, or using cords not in-

tended for use with this product will void war-

ranty.

Black And White Input Conductor (L1

And L2)

Notes

A complete Parts List is available at www.MillerWelds.com

Green Or Green/Yellow Grounding

Conductor

make

this

Input Power Cord.

Disconnect Device (switch shown in the

OFF position)

input

Disconnect Device Grounding Terminal

Disconnect Device Line Terminals

Connect green or green/yellow grounding

conductor to disconnect device grounding

terminal first.

Connect input conductors L1 and L2 to dis-

connect device line terminals.

Over-Current Protection

Select type and size of over-current

protection

using

Section

5-2

disconnect switch shown).

Receptacle (NEMA 6-50R)

Customer Supplied

Close and secure door on disconnect device.

Remove lockout/tagout device, and place

switch in the On position.

Power Cord

240 VAC cord with NEMA type 6-50P plug

and SDG plug.

10 Plug - SDG

11 Plug - NEMA Type 6-50P

12 Receptacle - SDG

OM-275099 Page 19

(fused