Miller Spoolmatic 30A Benutzerhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für das Schweißen Miller Spoolmatic 30A herunter. Miller Spoolmatic 30A 36 Seiten. Welding guns
Auch für Miller Spoolmatic 30A: Benutzerhandbuch (32 seiten), Benutzerhandbuch (32 seiten)

Seite drucken
Miller Spoolmatic 30A Benutzerhandbuch

5-7. Installing Gas Supply

6
5
4
Tools Needed:
1-1/8, 5/8 in.
OM-264 713 Page 12
Argon Gas
OR
7
8
CO
Obtain gas cylinder and chain to
running gear, wall, or other station-
ary support so cylinder cannot fall
and break off valve.
1
Cap
2
Cylinder Valve
Remove cap, stand to side of valve,
and open valve slightly. Gas flow
blows dust and dirt from valve.
Close valve.
3
Cylinder
4
Regulator/Flowmeter
Install so face is vertical.
1
.
Delivery pressure range must
not exceed 60 psi.
5
Gas Hose Connection
Fitting has
threads.
2
6
Flow Adjust
Typical flow rate is 20 cfh (cubic feet
per hour). Check wire manufactur-
er's recommended flow rate.
Make sure flow adjust is closed
when opening cylinder to avoid
damage to the flowmeter.
3
7
CO
8
O-Ring
Install adapter with O-ring between
regulator/flowmeter
cylinder.
1
2
3
Gas
2
5/8-18
right-hand
Adapter
2
and
CO
2
ssb3.1* 5/94 − 158 697-A