Miller Subarc DC 1000 Benutzerhandbuch - Seite 34

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Tragbarer Generator Miller Subarc DC 1000 herunter. Miller Subarc DC 1000 48 Seiten.

Seite drucken
Miller Subarc DC 1000 Benutzerhandbuch
SECTION 5 – MAINTENANCE AND TROUBLESHOOTING

5-1. Routine Maintenance

3 Months
Replace damaged
or unreadable
labels.
Repair
or
replace
cracked cables and
cords.
6 Months
Blow out inside.
5-2. Fuses F1 And F2
OM-2221 Page 30
Y Disconnect input power
before maintaining.
Repair or
replace
cracked cables.
Clean and
tighten
weld
terminals.
1
Rear of Unit
.
Maintain more often
during severe conditions.
Replace
cracked
torch body.
Y Turn Off welding power
source and disconnect input
power before checking fuse.
Fuses F1 and F2 protect the 115
volt ac winding of transformer T2. If
2
fuse F1 or F2 opens, the welding
power source shuts down.
Remove top cover from unit to ac-
cess fuses.
1
Fuse F1
Check F1 and replace if needed,
using a fuse of the same rating.
2
Fuse F2
Check F2 and replace if needed,
using a fuse of the same rating.
Use proper tool when removing
fuses.
Reinstall top cover.
Tools Needed:
3/8 in
Ref. ST-801 883-B