Burkhard Reuter RLA4 Spezifikationen und Betriebsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Spezifikationen und Betriebsanleitung für Antenna Burkhard Reuter RLA4 herunter. Burkhard Reuter RLA4 9 Seiten.

Burkhard Reuter RLA4 Spezifikationen und Betriebsanleitung
Please always observe the following safety instructions!
Never connect the device to any other voltage than indicated in the specifications. Under no
circumstances should the the device come into contact with the mains voltage of 110 / 230 V ~!
The device is intended for indoor use. Do not expose it to moisture. If moisture (e.g. spilled drinks)
has accidentally come into contact or even got into the device, immediately take it out of operation
(remove power supply) and send it back to the supplier for verification!
If you use the device outdoors (observe temperature and humidity restrictions!), please observe
the lightning protection regulations for the outdoor operation of electrotechnical systems! In case
of risk of lightning hazard, immediately take the device out of operation and disconnect it safely
from other devices (remove RF connection)!
Observe the permitted temperature range for starting up the device! Do not switch the device on or
off again if this range is exceeded or fallen below!
Always ensure a safe installation on a level, even and firm surface of adequate load-bearing
capacity! Always transport the device either in solid cardboard or wooden boxes (e.g. the delivery
packaging), or transport it by firmly gripping the amplifier housing! The device may cause injury in
the event of a fall due to its own weight!
Never expose the device to mechanical stress such as impact, pressure, vibration or shock
beyond what exceeds the domestic use of electronic equipment! Never carry or fasten the device
to the antenna element.
If you notice any damage to the device, immediately take it out of operation (remove power
supply)! If necessary, return it to the supplier for repair.
If you wish to dispose the device due to damage or because you do not use it anymore, return it to
the supplier or to your local waste collection center. Never dispose the device in any other way, for
example, with your household waste!
Use only soft, lint-free and dry cloths for cleaning the device! In case of persistent soiling, never
use solvents! At most, a slight moistening of the cleaning rag with distilled water is appropriate!
Make sure that moisture never penetrates into the device!
EDITION
DATE
1.5
8/19/19

Safety information

K & M Burkhard Reuter
NAME
RLA4
B. Reuter
3
9
Page
of