Burkhard Reuter RLA4 Spezifikationen und Betriebsanleitung - Seite 8
Blättern Sie online oder laden Sie pdf Spezifikationen und Betriebsanleitung für Antenna Burkhard Reuter RLA4 herunter. Burkhard Reuter RLA4 9 Seiten.
Seite drucken
The RLA4 versions D and E possess individual elements made of printed circuit board material (FR4)
instead of the stainless steel loops. Each closed loop consists of 2 elements, each of which must be
screwed on using short M4 screws (Torx) and a spring washer. For this purpose, the connecting bolts of
the amplifier have vertical flat surfaces with threaded holes. At the top of the threaded rod 2 mounting
cubes with 4 internal threads each are installed. In total, 3 screws with spring washers are required for
each loop section (one for the connecting bolt, two for the mounting cube of the threaded rod).
The following images illustrate the assembly of the loop elements.
EDITION
DATE
1.5
8/19/19
Connection bolt of the amplifier with an installed steel strip
Connection of the steel strips with the threaded rod
NAME
B. Reuter
K & M Burkhard Reuter
RLA4
8
9
Page
of