Burkhard Reuter RLA4 사양 및 작동 매뉴얼 - 페이지 8

{카테고리_이름} Burkhard Reuter RLA4에 대한 사양 및 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Burkhard Reuter RLA4 9 페이지.

The RLA4 versions D and E possess individual elements made of printed circuit board material (FR4)

instead of the stainless steel loops. Each closed loop consists of 2 elements, each of which must be

screwed on using short M4 screws (Torx) and a spring washer. For this purpose, the connecting bolts of

the amplifier have vertical flat surfaces with threaded holes. At the top of the threaded rod 2 mounting

cubes with 4 internal threads each are installed. In total, 3 screws with spring washers are required for

each loop section (one for the connecting bolt, two for the mounting cube of the threaded rod).

The following images illustrate the assembly of the loop elements.

EDITION

DATE

1.5

8/19/19

Connection bolt of the amplifier with an installed steel strip

Connection of the steel strips with the threaded rod

NAME

B. Reuter

K & M Burkhard Reuter

RLA4

Page