Chromalox RTPC Einbauanleitung

Blättern Sie online oder laden Sie pdf Einbauanleitung für Kabel und Anschlüsse Chromalox RTPC herunter. Chromalox RTPC 4 Seiten. Power connection kit for self-regulating & constant wattage heating cables
Auch für Chromalox RTPC: Installationsanleitung Handbuch (8 seiten)

Seite drucken

RTPC Power Connection Kit for Self-Regulating

and Constant Wattage Rapid-Trace Heating Cable

ELECTRIC SHOCK HAZARD. Disconnect all power

before installing or servicing heating cable and

accessories. A qualified person must perform

installation and service of heating cable and

accessories. Heating cable must be effectively

g r o u n d e d i n a c c o r d a n c e w i t h t h e N a t i o n a l

Electrical Code. Failure to comply can result in

personal injury or property damage.

NOTE: All electrical wiring, including GFCI (Ground Fault

Circuit Interrupters), must be done according to National

Electrical or local codes by a qualified person.

The RTPC Kit is used to connect base, braided (-C) and over-

coated (-CR or -CT) versions of Self-Regulating and Fluoropolymer

insulated Constant Wattage Rapid-Trace Heating Cables to power.

Chromalox

Installation Instructions

RTPC Power Connection Kit Parts:

1 - Molded Junction Box consisting of:

Base - Box - Lid - Hardware

1 - Three Position Terminal Block

1 - Mounting Screw for Terminal Block

SERVICE REFERENCE

DIVISION

SALES

REFERENCE

DATE

1 - Black Cable Grommet

1 - Orange Cable Grommet

1 - Cover Gasket

GENERAL

The cable grommet is furnished with this kit, such that the black

grommet is used for self-regulating cables SRL, SRF, SRM/E,

SRL/S, SRMF/S and the orange grommet is used for constant

wattage cable CWM and self-regulating cable SRS.

Each kit contains enough material to make one power connec-

tion point. It is possible to connect up to three Self-Regulating or

two Constant Wattage Cables in the same box. (One grommet

required for each cable.)

Materials required for installation include: standard electrical

cutters, screwdriver, sharp utility knife and a pipe strap

(Chromalox PS or equal).

Wipe inside lip of cover with a clean cloth. Remove protective

backing from the gasket and affix it to the cover lip. Press firmly

all around for proper adhesion.

SECTION

(Supersedes PJ451-10)

161-562762-001

MARCH, 2009

PJ451-11