Aquaport DELUXE AQP-WCM Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch für Wasserspender Aquaport DELUXE AQP-WCM herunter. Aquaport DELUXE AQP-WCM 12 Seiten. Executive water cooler, cold and room
Seite drucken2. To remove the bottle supporter there is an arrow and the
word "OPEN" embossed into the bottle support. Line this up
with the small sticker found on the top panel of the water
cooler that also has an arrow the word "OPEN". Then grab
the bottle supporter by placing your fingers under the rim and
vertically pull off.
3. When the bottle support is removed you should be able to
see inside the stainless steel cooling tank.
4. Follow the instructions that come with the filter bottle for
correct installation.
5. Place the filter bottle on top of the water cooler and fill as per
the instruction in the filter bottle user manual.
Note: Filter bottles generally have a
slower flow rate compared to spring
Fig 1
water bottles, hence it will take longer
to fill the cooling tank. Allow the
cold tank to fill for 30 minutes before
following Steps 2-5 as explained in
section A) Executive water cooler
Installation for Spring Water bottles.
C. Product Use
Always closely supervise children around this appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
The Aquaport Executive water cooler has been rated to provide
a limited number of servings per hour. On average you should be
able to receive 2-4L of cold water within 1hour. Higher ambient
temperature will affect its performance.
The thermostat has been set by the manufacturer and does not
need to be adjusted. Do not adjust the thermostat unless advised
by Aquaport. Unauthorised adjustment or modification to the unit
will void the warranty.
Do not hesitate to contact our Customer Care Service line on
1300 764 325 or [email protected]
INSTALLATION AND OPERATING INSTRUCTIONS 5