Diamond TQ-1800 Installations- und Betriebshandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Kommerzielle Lebensmittelausrüstung Diamond TQ-1800 herunter. Diamond TQ-1800 20 Seiten. Electric conveyor toasters

Seite drucken

INSTALLATION

ASSEMBLY

1. Remove unit from box.
2. Remove information packet. To prevent delay
in obtaining warranty coverage, fill out and
mail in warranty card to Hatco.
3. Remove tape from Discharge Chute, Crumb Tray
and Toast Collector Pan. See Figure 4.
4. If toaster is not level adjust the foot of each leg
until level. (TQ-10 & TQ-15 models use 9/16"
(14 mm) open-end wrench to adjust leg height.)

LOCATION

CAUTION
Do not locate the toaster in an area subject to
excessive temperatures or grease from grills,
fryers, etc. Excessive temperatures could cause
damage to the unit. Do not place toaster in an
area that restricts air flow around the front or
rear of the unit. Do not place toaster in direct
discharge path of air conditioning vent or
makeup air vent.
WARNING
For safe and proper operation, the unit must be
located a reasonable distance from combustible
walls and materials. If safe distances are not
maintained, discoloration or combustion could
occur. Do not locate toaster under shelving or
closer than 12" (305 mm) from the ceiling.
WARNING
To assure safe and proper operation while
operating in the Front Discharge mode, allow a
minimum clearance of 1" (25 mm) along the
sides and rear. Allow a minimum clearance of
12" (305 mm) along the front.
WARNING
To assure safe and proper operation while
operating in the Rear Discharge mode, allow a
minimum clearance of 1" (25 mm) along the
sides. Allow a minimum clearance of 12"
(305 mm) along the front and rear.
Form No. TQ2M-1005
Crumb Tray
Figure 4. Front View – TQ-400 Model Shown
Leg Adjustment
Adjust leg using
a 9/16" (14 mm)
open-end wrench
and turning bottom
of leg accordingly.
Figure 5. Adjustable Legs (TQ-10 & TQ-15 Models Only)
To avoid any injury or damage locate the unit at
the proper counter height, in an area that is
convenient for use. The location should be level
to prevent the unit or its contents from
accidentally falling, and strong enough to
support the weight of the unit and food.
Do not place anything on top of the toaster;
doing so could damage toaster or subject
personnel to possible injury.
8
Toast Collector Pan
Discharge Chute
SHORTEN
LENGTHEN
CAUTION
CAUTION