Chrontel CH7034B Anwendungshinweise
Blättern Sie online oder laden Sie pdf Anwendungshinweise für Medienkonverter Chrontel CH7034B herunter. Chrontel CH7034B 18 Seiten. Hdtv/vga/lvds encoder
AN-B013
Application Notes
Chrontel
PCB Layout and Design Guide for CH7034B HDTV/VGA/LVDS Encoder
1.0 I
NTRODUCTION
Chrontel CH7034B is specifically designed for a portable system that requires connections to LCD display, High
Definition Television (HDTV) or RGB (VGA) monitor. With its advanced video encoder, flexible scaling engine and
easy-to- configure audio interface, the CH7034B satisfies manufactures' product display requirements and reduces their
cost of development and time-to-market.
This application note focuses only on the basic PCB layout and design guidelines for CH7034B HDTV/VGA/LVDS
encoder. Guidelines in component placement, power supply decoupling, grounding, input /output signal interface are
discussed in this document.
The discussion and figures that follow reflect and describe connections based on the 88-pin QFN package of the
CH7034B. Please refer to the CH7034B datasheet for the details of the pin assignments.
2.0 C
P
D
C
OMPONENT
LACEMENT AND
ESIGN
ONSIDERATIONS
Components associated with the CH7034B should be placed as close as possible to the respective pins. The following
discussion will describe guidelines on how to connect critical pins, as well as describe the guidelines for the placement
and layout of components associated with these pins.
2.1
Power Supply Decoupling
The optimum power supply decoupling is accomplished by placing a 0.1μF ceramic capacitor to each of the power
supply pins as shown in Figure 1. These capacitors (C1, C2, C4, C5, C7, C8, C10, C11, C13, C14, C16, C18, C19, C22)
should be connected as close as possible to their respective power and ground pins using short and wide traces to
minimize lead inductance. Whenever possible, a physical connecting trace should connect the ground pins of the
decoupling capacitors to the CH7034B ground pins, in addition to ground vias.
2.1.1
Ground Pins
The analog and digital grounds of the CH7034B should be connected to a common ground plane to provide a low
impedance return path for the supply currents. Whenever possible, each of the CH7034B ground pins should be
connected to its respective decoupling capacitor ground lead directly, then connected to the ground plane through a
ground via. Short and wide traces should be used to minimize the lead inductance. Refer to Table 1 for the Ground pins
assignment.
2.1.2 Power Supply Pins
The power supply include AVDD, AVDD_DAC, VDDH, AVDD_PLL, VDDIO, DVDD, VDDMQ, VDDMS.
Refer toTable1 for the Power supply pins assignment. Refer to Figure 1 for Power Supply Decoupling.
206-1000-013
Rev1.4,
06/30/2020
1