Diamond Antenna SG-M510 Handbuch
Blättern Sie online oder laden Sie pdf Handbuch für Antenna Diamond Antenna SG-M510 herunter. Diamond Antenna SG-M510 2 Seiten. 2m/70cm dual-band mobile antenna
Auch für Diamond Antenna SG-M510: Assembly (2 seiten)
Seite druckenFREQUENCY:
GAIN :
POWER :
ELEMENT PHASING : 2m: 1/2l, 70cm: 2 5/8l
IMPEDANCE :
LENGTH :
WEIGHT :
MOUNT :
WARRANTY :
Recommended Mounts: Any Diamond K-Series mount with UHF base connector.
1. Remove antenna from package and inspect contents to insure it is complete.
2. Choose desired mounting location to insure maximum strength of mount, and best performance of antenna.
3. Install antenna on vehicle. With quality VSWR meter, check VSWR. The SG-M510 is pre-tuned and should not require
any additional tuning.
4. Tighten setscrews. Recommend using removable Loctite Threadlocker #242 or similar product on setscrews.
Lift upper half of foldover hinge vertically out of its conical socket, avoiding the use of the sockets' edge as a fulcrum.
Position hinge to permit foldover in desired direction. Care should be taken when folding over, not to damage vehicle
or antenna. Do not drive with antenna in folded position.
PFP 'XDO%DQG 0RELOH $QWHQQD
2m: 144-148 MHz, 70cm: 440-450 MHz
2m: 2.15 dBi, 70cm: 5.5 dBi
100 Watts
50 Ohms (nominal)VSWR : 1.5:1 (nominal)
37"
.3 lbs.
UHF Male
1 year against defects in material or workmanship.
Foldover Hinge Assembly
',$021' $17(11$ 3URGXFWV DUH GLVWULEXWHG E\ 5) 3$576 &203$1<
6 3DFLILF 6WUHHW 6DQ 0DUFRV &$
ZZZGLDPRQGDQWHQQDQHW
SG-M510
Specifications
Antenna Assembly