3branch KURVE Montageanleitung Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Inneneinrichtung 3branch KURVE herunter. 3branch KURVE 6 Seiten. Desk w/hand crank adjustable height "t" base
Seite drucken
HANDLE
ASSEMBLY
STEP 11:
LOCATE HANDLE ASSEMBLY IN FRONT OF COLUMN "A".
NOTE: HANDLE ASSEMBLY IS CENTERED ON COLUMN. THE ROD
PROTRUDING BEHIND THE ASSEMBLY IS INSERTED INTO THE THRU
HOLE IN THE COLUMN. THE HANDLE ASSEMBLY IS PUSHED UP
TIGHT TO THE MOUNTING PLATE.
HANDLE
ASSEMBLY
BACK COVER
STEP 14:
LOCATE HANDLE ASSEMBLY BACK COVER BEHIND COLUMN "A".
NOTE: BACK COVER IS CENTERED ON COLUMN. THE COVER FITS
OVER THE HANDLE ASSEMBLY ROD PROTRUDING THRU THE COLUMN.
THE BACK COVER IS PUSHED UP TIGHT TO MOUNTING PLATE.
KURVE COLLECTION
3branch
product design solutions
STEP 12:
WITH THE HANDLE ASSEMBLY IN PLACE, MARK & DRILL PILOT HOLES
IN THE BOTTOM FACE OF THE APRON/SUB-TOP ASSEMBLY.
STEP 13:
ATTACH HANDLE ASSEMBLY TO APRON/SUB-TOP ASSEMBLY WITH
#12 X 1" WOOD SCREWS PROVIDED (4 TOTAL).
STEP 15:
WITH THE HANDLE ASSEMBLY BACK COVER IN PLACE, MARK &
DRILL PILOT HOLES IN THE BOTTOM FACE OF THE APRON/
SUB-TOP ASSEMBLY.
STEP 16:
ATTACH HANDLE ASSEMBLY TO APRON/SUB-TOP ASSEMBLY WITH
#12 X 1" WOOD SCREWS PROVIDED (2 TOTAL).
DESCRIPTION:
P 847.291.3900
F 847.291.3901
www.3branch.com
DATE:
09.23.21
MOUNTING
SCREWS
MOUNTING
SCREWS
KURVE DESK W/HAND CRANK ADJUSTABLE
HEIGHT "T" BASE
ASSEMBLY INSTRUCTIONS
DWG #
SK-KU-DESK-ADJT-ASSEMBLY-01
REV #
0
SHEET
5 OF 6