Panasonic AW-HEA10KPJ Betriebsanleitung - Seite 25

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Digitalkamera Panasonic AW-HEA10KPJ herunter. Panasonic AW-HEA10KPJ 34 Seiten. Control assist cameras
Auch für Panasonic AW-HEA10KPJ: Installations- und Betriebsanleitung (40 seiten)

Seite drucken

Web screen configurations (continued)

Maintenance screen

This screen allows you to perform maintenance related operations such

as viewing the unit information or initializing the settings.

The screen consists of two tabs: [Information] and [Other].

Information screen

Displays the model number ([Model no.]), MAC address ([Mac address]),

and software version ([Firmware version]) of the unit, and the user last

logged in to the Setup screen ([Access log]).

To display the [Information] screen, click the [Information] tab in the

[Maintenance] screen.

Model no.

Displays the unit's model number.

MAC address

Displays the unit's MAC address.

Firmware version

Displays the unit's software version.

Access log

Displays the user last logged in to the Setup screen.

Other screen

Initialize the unit's setting data or configure the display settings.

To display the [Other] screen, click the [Other] tab in the [Maintenance]

screen.

Reset to the default (Except the network settings)

Restore the unit's settings to the initial settings.

A confirmation message appears when the [Execute] button is

clicked. Click [OK].

CAM/BAR

Change the image displayed on the monitor of the HDMI output

destination or the Web setup screen.

After changing this setting, click [Execute].

Setting values:

Camera

Displays the camera image.

Colorbar

Displays the color bars.

Factory setting: Camera

<NOTE>

• You can also switch between the camera image display and the

color bar display with the controller.

• The color bars displayed differ depending on the system frequency

setting.

Guideline

Select whether to show or hide the guideline display.

After changing this setting, click [Execute].

Setting values: Off / On

Factory setting: Off

Operation time

Check the unit's operation time.