Panasonic AW-HEA10KPJ Panduan Petunjuk Pengoperasian - Halaman 25
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kamera Digital Panasonic AW-HEA10KPJ. Panasonic AW-HEA10KPJ 34 halaman. Control assist cameras
Juga untuk Panasonic AW-HEA10KPJ: Panduan Petunjuk Pemasangan dan Pengoperasian (40 halaman)
Halaman Cetak
Web screen configurations (continued)
Maintenance screen
This screen allows you to perform maintenance related operations such
as viewing the unit information or initializing the settings.
The screen consists of two tabs: [Information] and [Other].
Information screen
Displays the model number ([Model no.]), MAC address ([Mac address]),
and software version ([Firmware version]) of the unit, and the user last
logged in to the Setup screen ([Access log]).
To display the [Information] screen, click the [Information] tab in the
[Maintenance] screen.
Model no.
Displays the unit's model number.
MAC address
Displays the unit's MAC address.
Firmware version
Displays the unit's software version.
Access log
Displays the user last logged in to the Setup screen.
Other screen
Initialize the unit's setting data or configure the display settings.
To display the [Other] screen, click the [Other] tab in the [Maintenance]
screen.
Reset to the default (Except the network settings)
Restore the unit's settings to the initial settings.
A confirmation message appears when the [Execute] button is
clicked. Click [OK].
CAM/BAR
Change the image displayed on the monitor of the HDMI output
destination or the Web setup screen.
After changing this setting, click [Execute].
Setting values:
Camera
Displays the camera image.
Colorbar
Displays the color bars.
Factory setting: Camera
<NOTE>
• You can also switch between the camera image display and the
color bar display with the controller.
• The color bars displayed differ depending on the system frequency
setting.
Guideline
Select whether to show or hide the guideline display.
After changing this setting, click [Execute].
Setting values: Off / On
Factory setting: Off
Operation time
Check the unit's operation time.
25