Panasonic DMC-FH10P Service-Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Service-Handbuch für Digitalkamera Panasonic DMC-FH10P herunter. Panasonic DMC-FH10P 38 Seiten.
Auch für Panasonic DMC-FH10P: Benutzerhandbuch (2 seiten)

Seite drucken
Panasonic DMC-FH10P Service-Handbuch

3 Service Navigation

3.1.

Introduction

This service manual contains technical information, which allow service personnel's to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.
3.2.

Important Notice

3.2.1.
CCD FPC UNIT:
• The image sensor (CCD FPC) unit which are connected to the lens unit with 3 screws.
These screws are adjusted for the Optical tilt.
During servicing, if one of CCD FPC fixing screws are loosened, the Optical tilt adjustment must be performed.
About the Optical tilt adjustment, refer to the "9.3.2. Adjustment Specifications" for details.
3.2.2.
P.C.B.:
• In order to remove Main P.C.B., it is necessary to remove the solder (3 points) of the battery terminal.
It is judged that the analysis of the Main P.C.B. which the battery terminal separated is difficult.
So the Main P.C.B. is unit exchange.
Please fix individually about the Flash Top P.C.B..
3.2.3.
LENS UNIT:
The minimum replacement part size of the Lens part is as shown below.
When servicing, replace the following numbered replacement part size as the smallest size.
3.2.4.
About Flexible Cable and Connector
Do not touch carelessly so that the foreign body should not adhere to the terminal part of flexible cable and connector.
Wipe off with a clean cloth and the cotton bud, etc. when the terminal part is dirty.
6