Panasonic DMC-FH10P 서비스 매뉴얼 - 페이지 6

{카테고리_이름} Panasonic DMC-FH10P에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic DMC-FH10P 38 페이지.
Panasonic DMC-FH10P에 대해서도 마찬가지입니다: 소유자 매뉴얼 (2 페이지)

3 Service Navigation

3.1.

This service manual contains technical information, which allow service personnel's to understand and service this model.

Please place orders using the parts list and not the drawing reference numbers.

If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.

3.2.

3.2.1.

CCD FPC UNIT:

• The image sensor (CCD FPC) unit which are connected to the lens unit with 3 screws.

These screws are adjusted for the Optical tilt.

During servicing, if one of CCD FPC fixing screws are loosened, the Optical tilt adjustment must be performed.

About the Optical tilt adjustment, refer to the "9.3.2. Adjustment Specifications" for details.

3.2.2.

P.C.B.:

• In order to remove Main P.C.B., it is necessary to remove the solder (3 points) of the battery terminal.

It is judged that the analysis of the Main P.C.B. which the battery terminal separated is difficult.

So the Main P.C.B. is unit exchange.

Please fix individually about the Flash Top P.C.B..

3.2.3.

LENS UNIT:

The minimum replacement part size of the Lens part is as shown below.

When servicing, replace the following numbered replacement part size as the smallest size.

3.2.4.

About Flexible Cable and Connector

Do not touch carelessly so that the foreign body should not adhere to the terminal part of flexible cable and connector.

Wipe off with a clean cloth and the cotton bud, etc. when the terminal part is dirty.