Panasonic DMC-FH10P 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Panasonic DMC-FH10P에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic DMC-FH10P 38 페이지.
Panasonic DMC-FH10P에 대해서도 마찬가지입니다: 소유자 매뉴얼 (2 페이지)

페이지 인쇄
Panasonic DMC-FH10P 서비스 매뉴얼
1.4.
How to Discharge the E.Capacitor on Flash Top P.C.B.
CAUTION:
• Be sure to discharge the E.Capacitor on Flash Top P.C.B. before disassembling.
• Be careful of the high voltage circuit on Flash Top P.C.B. when servicing.
[Discharging Procedure]
1. Put the insulation tube on the lead part of resistor (ERG5SJ102:1kΩ /5W).
(An equivalent type of resistor may be used.)
2. Put the resistor between both terminals of E.Capacitor on the Flash Top P.C.B. for approx. 5 seconds.
3. After discharging, confirm that the E.Capacitor voltage is lower than 10V by using a voltmeter.
Fig. F1
4