Panasonic DMC-FT2 Grundlegende Betriebsanleitung - Seite 13
Blättern Sie online oder laden Sie pdf Grundlegende Betriebsanleitung für Digitalkamera Panasonic DMC-FT2 herunter. Panasonic DMC-FT2 40 Seiten. Brochure
Auch für Panasonic DMC-FT2: Broschüre (2 seiten), Grundlegende Betriebsanleitung (36 seiten)
1:With the [LOCK] switch released, close the card/
battery door and terminal cover by pushing until you
hear a click.
•
To prevent water seeping into the camera, be careful not to trap foreign
objects such as liquids, sand, hair or dust etc.
•
Closing the door with the [LOCK] switch in the locked state may result in
damage or leaks.
2:Slide the [LOCK] switch in the direction of the arrow
until the visible red portion is no longer visible and the
switch is locked.
•
If you use the camera without securely closing the door and cover, it may
open and close of its own accord.
Red part
N:
O: [LOCK] switch (grey part)
P: Released state
Q: Locked state
Note
•
If there is any foreign object, remove it
with attached brush.
•
Sand and dust etc. will unintentionally
adhere to the camera by lodging in
between the gap around the card/
battery door or terminal cover when
used in the following locations:
–
Where sand is floating, such as in the
sea or water etc.
–
Where there is a lot of sand or dust,
such as at the beach or in a sand box
etc.
•
To prevent unintentional opening of the card/battery door and terminal
cover, it is recommended to use the supplied silicon jacket.
13
(ENG) VQT2M41