HP ProCurve 1600M Handbuch Ergänzung - Seite 20

Configuring VRRP

Figure 5

VRRP configuration information for owner

NOTE: If the parameter is not defined or does not apply to this type of entry, the field is blank. For example, in

Figure 5, the Backup Priority parameter does not apply to this entry because the entry is for an owner.

Figure 6

VRRP configuration information for Backup

Each display shows a separate set of information for each VRRP interface configured on the router. Note that the

displays contain two fields for priority. The first priority field lists the VRRP priority of the interface. The second

priority field (current priority or Track Priority) normally contains the same value as the first priority field. However,

if you configure a track port for this VRRP interface and the interface goes down, the track port changes the

interface's priority to match the track priority. The new priority value is then displayed in the current priority field.