HP StorageWorks 2/16 - SAN Switch Freigabemitteilung - Seite 21

Blättern Sie online oder laden Sie pdf Freigabemitteilung für Schalter HP StorageWorks 2/16 - SAN Switch herunter. HP StorageWorks 2/16 - SAN Switch 32 Seiten. Fabric os commands
Auch für HP StorageWorks 2/16 - SAN Switch: Handbuch aktualisieren (9 seiten), Installationsanleitung Handbuch (20 seiten), Benutzerhandbuch (22 seiten), Firmware-Versionshinweise (14 seiten), Freigabemitteilung (16 seiten), Installationshandbuch (14 seiten), Freigabemitteilung (10 seiten), Kurzreferenz-Handbuch (5 seiten)

Seite drucken

HP StorageWorks 2/16 - SAN Switch Freigabemitteilung

Documentation Updates

Table 4

StorageWorks Diagnostics and System Error Messages Reference Guide.

Table 4: Version 3.1.2 Error Messages Not Previously Available

Severity & Message

Critical

DIAG-BADINT, 1

Critical

DIAG-BUS_TIMEOUT, 1

Critical

DIAG-CAMFLTR, 1

SAN Switch 2/16 Fabric OS 3.1.2 Release Notes

lists error messages that were not available during the release of the HP

Probable Cause

Port received an unexpected

interrupt. This usually indicates an

ASIC failure. This message is

generated by the

centralmemorytest or the

cmitest command, if problems

are found.

ASIC register or ASIC SRAM did not

respond to an ASIC data access.

This usually indicates an ASIC

failure. This message is generated

by the portregtest or the

sramretentiontest command,

if problems are found.

ASIC internal logic failed. This

usually indicates an ASIC failure.

This message is generated by the

filtertest command, if

problems are found.

Documentation Updates

Recommended Action

For the SAN Switch 2/16,

replace the motherboard FRU.

For the SAN Switch 2/8 EL,

replace the entire switch.

For the SAN Switch 2/16,

replace the motherboard FRU.

For the SAN Switch 2/8 EL, you

must replace the entire switch.

For the SAN Switch 2/16,

replace the motherboard FRU.

For the SAN Switch 2/8 EL, you

must replace the entire switch.