HP StorageWorks 2/16 - SAN Switch Freigabemitteilung - Seite 4

Blättern Sie online oder laden Sie pdf Freigabemitteilung für Schalter HP StorageWorks 2/16 - SAN Switch herunter. HP StorageWorks 2/16 - SAN Switch 10 Seiten. Fabric os commands
Auch für HP StorageWorks 2/16 - SAN Switch: Handbuch aktualisieren (9 seiten), Installationsanleitung Handbuch (20 seiten), Benutzerhandbuch (22 seiten), Firmware-Versionshinweise (14 seiten), Freigabemitteilung (32 seiten), Freigabemitteilung (16 seiten), Installationshandbuch (14 seiten), Kurzreferenz-Handbuch (5 seiten)

Seite drucken
HP StorageWorks 2/16 - SAN Switch Freigabemitteilung
NOTE:
HP software release policy is to carry forward all fixes in patches to subsequent
maintenance and feature releases of Fabric OS.

Supported switches

Fabric OS v3.2.1 supports the following switches:
•
HP StorageWorks SAN Switch 2/8
•
HP StorageWorks MSA SAN switch 2/8
•
HP StorageWorks SAN Switch 2/16
Fabric OS 3.2.1 updates
Table 1
lists Fabric OS 3.2.1 fixes.
Table 1
Issues resolved in this 3.2.1 release
Issue prior to Fabric OS 3.2.1
Third party tape drives did not respond to
Login (L) bit, based on switch lock L port
configuration.
After executing switchdisable or enable
in a large, secure fabric, some SAN Switch
2/16 models experienced queue overflow
and rebooted.
No monitoring of basic monitor service
without an Advanced Performance
Monitoring (APM) license.
config upload failed on switches
supporting a large Zone database.
SAN Switch 2/16 models panicked when
connected to a third party switch during
Zoning updates in Interop mode.
SAN Switch 2/16 models used incorrect
buffer-tobuffer (BB) credits when switch BB
credit was set less than device BB credit.
4
Supported switches
Fix
Third party tape drives working with SAN Switch 2/16.
SAN Switch 2/16 in large, secure fabrics do not
experience queue overflow messages and switch reboot.
Basic monitoring allowed without an Advanced
Performance Monitoring (APM) license.
API_MAX_CONFIG size is increased.
SAN Switch 2/16 models operate normally during
Zoning updates in Interop mode.
Fabric OS 3.2.1 uses same BB credit limit as
defined in switch.